In this article
Short answer
For AI work the ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC is the safer choice. It runs CUDA, which almost every AI tool supports first, and it leads the ASUS TUF Gaming Radeon RX 9070 XT 16GB OC in every published AI test cited. The Radeon card suits buyers comfortable with extra setup, Linux or Vulkan.
- Both cards have 16 GB of video memory; the RTX 5070 Ti uses GDDR7 (896 GB/s from 28 Gbps on 256-bit) and the RX 9070 XT GDDR6 (up to 640 GB/s).
- Puget Systems measured about 40% faster token generation on the RTX 5070 Ti.
- The lead is about 20% to 66% in cited text and image-generation tests, and far larger in Procyon's computer-vision test.
- AMD lists the RX 9070 XT as supported by ROCm 10; the PyTorch selector offers ROCm builds on Linux only.
- ASUS recommends 750 W for the Prime and 850 W for the TUF.
- Pick 1ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC
- Pick 2ASUS TUF Gaming Radeon RX 9070 XT 16GB OC
Side by side#
| Spec | ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC | ASUS TUF Gaming Radeon RX 9070 XT 16GB OC |
|---|---|---|
| GPU | NVIDIA GeForce RTX 5070 Ti | AMD Radeon RX 9070 XT |
| Memory size (VRAM) | 16 GB | 16 GB |
| Memory type | GDDR7 | GDDR6 |
| Memory interface | 256-bit | 256-bit |
| Memory bandwidth | 896 GB/s (from 28 Gbps on a 256-bit bus) | Up to 640 GB/s |
| Shader units | 8,960 CUDA cores | 4,096 stream processors, 64 compute units |
| AI performance | 1406 TOPS | 128 AI accelerators, 389 TOPs INT8 (779 with sparsity) |
| Boost clock | 2497 MHz default | Up to 3060 MHz default |
| Total board power | 300 W (NVIDIA reference) | 304 W typical board power |
| Power connector | One 16-pin | Three 8-pin |
| Power supply recommended | 750 W | 850 W |
| Card size | 304 x 126 x 50 mm, 2.5 slots | 330 x 140 x 62.5 mm, 3.125 slots |
Prices change, so check current prices before buying. The RTX 5070 Ti bandwidth is worked out from the ASUS memory speed and bus width: 28 Gbps x 256 / 8.
Key differences#
On paper these cards look close: the same memory size, the same bus width and a similar power rating. The differences that matter for AI are in the software and in how each chip handles AI maths.
Software: CUDA and ROCm
NVIDIA introduced CUDA as a way to run general compute on GPUs. AMD's equivalent is ROCm, an open stack of runtimes, compilers and libraries. Most AI projects target CUDA first, and ROCm support arrives later or with conditions.
AMD's release notes for ROCm 10.0.0 list the RX 9070 XT as officially supported, and add Windows 11 support for Radeon. The PyTorch install selector offers a ROCm build for Linux only, and says ROCm is not available on Windows through pytorch.org. AMD ships its own Windows packages instead. Ollama lists RX 9000 series cards for AMD acceleration on Linux only, though it also supports Vulkan on both systems.
The RTX 5070 Ti needs none of this. PyTorch, llama.cpp, ComfyUI and Ollama all run on CUDA with a standard install on both Windows and Linux. Our explainer on CUDA vs ROCm for AI covers the steps in more detail.
AI hardware
NVIDIA lists 1406 AI TOPS for the RTX 5070 Ti, from 5th-generation Tensor Cores that support FP4. AMD lists 128 AI accelerators on the RX 9070 XT, with 389 TOPs of INT8 matrix throughput, or 779 with structured sparsity, and 779 TOPs of INT4. AMD's page lists no floating-point FP4 format.
The two numbers are not like for like. NVIDIA's rating is a peak figure in its lowest-precision format, and AMD's INT8 figure is a different measure. Use the benchmarks below instead of comparing the ratings.
Memory
Both cards carry 16 GB on a 256-bit bus, and neither can run a model that does not fit in that space. The memory types differ. AMD lists up to 640 GB/s for the RX 9070 XT on GDDR6. For the RTX 5070 Ti, ASUS lists 28 Gbps GDDR7 on a 256-bit bus, which works out to 896 GB/s. That is about 40% more bandwidth than the Radeon card, and token generation leans on memory speed.
Power and size
NVIDIA lists 300 W total graphics power for the RTX 5070 Ti and AMD lists 304 W typical board power for the RX 9070 XT, so heat output is similar. The cards differ in their connectors and their size. ASUS lists a single 16-pin connector and a 2.5-slot body for the Prime, and three 8-pin connectors and a 3.125-slot body for the TUF.
ASUS recommends an 850 W supply for the TUF. AMD's own reference page lists a 750 W minimum, so you should follow the board maker's figure for this card. The Prime asks for 750 W. A compact case suits the Prime better, because ASUS calls it SFF-ready.
Setup on Windows and Linux
On NVIDIA the path is short: install the driver, then install a PyTorch build that matches the CUDA version. Most tutorials for local models assume this route, so the commands you copy usually work.
On the Radeon card the path depends on the system. On Linux, AMD lists supported distributions and kernels, and the PyTorch selector offers a ROCm build. On Windows, ROCm 10.0 adds official support, and AMD supplies its own PyTorch packages because pytorch.org does not offer a ROCm build for Windows. ComfyUI documents both routes. llama.cpp offers a Vulkan backend that needs no ROCm at all, and Ollama accepts Vulkan on both systems. None of this is hard, but each step is one more place for a guide written for CUDA to break.
Choosing by workflow
Your tools decide more than the spec sheet. If AI work is a regular part of the week and you follow tutorials written for CUDA, the NVIDIA card removes setup friction. If you already work on Linux, or run llama.cpp through its Vulkan backend, the Radeon card's path is shorter than it first looks. The Radeon card also has a larger body, a higher boost clock on the ASUS TUF and three 8-pin connectors, so check the case and supply first.
Performance and benchmarks#
The sources fall into three groups: Puget Systems and Tom's Hardware lab tests, Back2Gaming's single-reviewer tests, and the llama.cpp community scoreboards. The first group carries most weight. The partner cards named in the sources do not all match the two ASUS models here. Puget used an ASUS Prime OC for the RTX 5070 Ti and a Sapphire Nitro+ OC for the RX 9070 XT. Tom's Hardware used an ASUS Prime and a PowerColor Reaper.
MLPerf Client v1.0 LLM tests, 2nd+ token generation rate (model not named on chart): token_generation_2nd_plus (tokens/s, higher is better)
5 products. Highest: INNO3D GeForce RTX 5090 X3 OC 32GB, 248 tokens/s. Lowest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 112.5 tokens/s.
| Product | tokens/s |
|---|---|
| INNO3D GeForce RTX 5090 X3 OC 32GB | 248 |
| ASUS TUF Gaming GeForce RTX 5080 16GB OC | 168.7 |
| ASUS Prime GeForce RTX 5070 Ti 16GB OC | 157.6 |
| ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC | 157.6 |
| ASUS TUF Gaming Radeon RX 9070 XT 16GB OC | 112.5 |
About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.
Puget Systems' MLPerf Client run gave 157.6 tokens per second for the RTX 5070 Ti and 112.5 for the RX 9070 XT, about 40% more for the NVIDIA card. The chart also shows the RTX 5090 and RTX 5080 for context.
MLPerf Client v1.0 LLM tests, geomean time to first token: time_to_first_token_geomean (seconds, lower is better)
4 products. Lowest: INNO3D GeForce RTX 5090 X3 OC 32GB, 0.11 seconds. Highest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 0.38 seconds.
| Product | seconds |
|---|---|
| INNO3D GeForce RTX 5090 X3 OC 32GB | 0.105 |
| ASUS TUF Gaming GeForce RTX 5080 16GB OC | 0.132 |
| ASUS Prime GeForce RTX 5070 Ti 16GB OC | 0.145 |
| ASUS TUF Gaming Radeon RX 9070 XT 16GB OC | 0.38 |
About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.
Time to first token shows a larger gap. Puget measured 0.145 seconds for the RTX 5070 Ti and 0.38 seconds for the RX 9070 XT. Both runs went through a Windows software path, so they describe the experience on Windows more than raw hardware ability.
Tom's Hardware ran an older MLPerf Client build in its review of the RX 9070 XT and reported 145.82 tokens per second for the RTX 5070 Ti and 112.98 for the RX 9070 XT, about 29% more.
Image generation shows the same order. Tom's Hardware ran UL Procyon's Stable Diffusion XL test with the best available engine for each card.
Procyon AI Image Generation, Stable Diffusion XL, benchmark score: benchmark_score (score, higher is better)
2 products. Highest: ASUS Prime GeForce RTX 5070 Ti 16GB OC, 3265 score. Lowest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 1969 score.
| Product | score |
|---|---|
| ASUS Prime GeForce RTX 5070 Ti 16GB OC | 3265 |
| ASUS TUF Gaming Radeon RX 9070 XT 16GB OC | 1969 |
About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.
The RTX 5070 Ti scored 3265 and the RX 9070 XT scored 1969, a lead of about 66%. These are launch-window results for the Radeon card, with a preview driver. Tom's Hardware published them in its review of the Radeon launch, and newer drivers may narrow the gap.
Procyon AI Computer Vision (AI Vision), benchmark score: benchmark_score (score, higher is better)
2 products. Highest: ASUS Prime GeForce RTX 5070 Ti 16GB OC, 4831 score. Lowest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 1339 score.
| Product | score |
|---|---|
| ASUS Prime GeForce RTX 5070 Ti 16GB OC | 4831 |
| ASUS TUF Gaming Radeon RX 9070 XT 16GB OC | 1339 |
About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.
Procyon's AI Vision test is a computer-vision benchmark, not an image-generation one, and the gap there is far wider. The RTX 5070 Ti scored 4831 against 1339, about 3.6 times as much. Tom's Hardware notes that AMD does poorly in integer modes through ONNX, which depresses the Radeon result, so treat this as an outlier.
Back2Gaming ran a more recent test on Linux with ComfyUI and llama.cpp, using ROCm 7.2.4 for the Radeon cards and CUDA for NVIDIA. It is a single small outlet, so treat it as supporting evidence.
Qwen3.5-9B (Q4_K_M) chat decode, 512-token answer: token_generation_decode (tokens/s, higher is better)
3 products. Highest: ASUS Prime GeForce RTX 5070 Ti 16GB OC, 124.1 tokens/s. Lowest: PowerColor Radeon AI PRO R9700 32GB, 83.4 tokens/s.
| Product | tokens/s |
|---|---|
| ASUS Prime GeForce RTX 5070 Ti 16GB OC | 124.1 |
| ASUS TUF Gaming Radeon RX 9070 XT 16GB OC | 84.2 |
| PowerColor Radeon AI PRO R9700 32GB | 83.4 |
About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.
On a 9B model at 4-bit with flash attention, Back2Gaming measured 124.1 tokens per second on the RTX 5070 Ti and 84.2 on the RX 9070 XT, a lead of about 47%. A Radeon AI PRO R9700 scored 83.4 in the same test.
Stable Diffusion XL 1.0 base, ComfyUI, 1024x1024, 30 steps, Euler, batch 1: images_per_minute (images/min, higher is better)
3 products. Highest: ASUS Prime GeForce RTX 5070 Ti 16GB OC, 9.84 images/min. Lowest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 8.22 images/min.
| Product | images/min |
|---|---|
| ASUS Prime GeForce RTX 5070 Ti 16GB OC | 9.84 |
| PowerColor Radeon AI PRO R9700 32GB | 9.03 |
| ASUS TUF Gaming Radeon RX 9070 XT 16GB OC | 8.22 |
About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.
For SDXL in ComfyUI at 1024 x 1024 and 30 steps, the RTX 5070 Ti produced 9.84 images per minute and the RX 9070 XT 8.22, about 20% more. This is the smallest gap in the set, and it is the closest the Radeon card comes in these tests.
The llama.cpp community scoreboards give a view of the Vulkan backend, where AMD and NVIDIA run through the same open interface.
llama-bench, Llama 2 7B Q4_0, Vulkan backend, tg128, flash attention on: token_generation_tg128 (tokens/s, higher is better)
6 products. Highest: INNO3D GeForce RTX 5090 X3 OC 32GB, 273.68 tokens/s. Lowest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 142 tokens/s.
| Product | tokens/s |
|---|---|
| INNO3D GeForce RTX 5090 X3 OC 32GB | 273.68 |
| ASUS TUF Gaming GeForce RTX 5080 16GB OC | 192.17 |
| ASUS Prime GeForce RTX 5070 Ti 16GB OC | 176.18 |
| ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC | 176.18 |
| PowerColor Radeon AI PRO R9700 32GB | 152.7 |
| ASUS TUF Gaming Radeon RX 9070 XT 16GB OC | 142 |
About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.
On a 7B Llama 2 model at 4-bit the RTX 5070 Ti reached 176.18 tokens per second and the RX 9070 XT 142.0, about 24% more. These come from volunteers with different boards, drivers and software builds, so they support the direction and do not set the size of the gap. Phoronix ran Lemonade tests on a Radeon AI PRO R9700, a workstation card and not the RX 9070 XT, and reported that Vulkan often gave more tokens per second than ROCm while ROCm gave lower latency. That finding comes from a different Radeon card, so it only suggests that the backend you choose can change the result on Radeon hardware.
A note on method helps here. Each outlet used different software, drivers and models, so the percentages are not directly comparable between charts. A 66% lead in an image test and a 24% lead in a text test do not average to a single figure. What the charts show together is direction: the NVIDIA card led in all of them, by a smaller margin on plain text generation through Vulkan and a larger margin in the image-generation tests.
The conclusion is steady across sources. The RTX 5070 Ti leads by roughly 20% to 66% across the cited text-generation and image-generation tests, and by far more in Procyon's computer-vision (AI Vision) test, where it scored about 3.6 times as much.
Value for money#
Both cards belong to the upper mid-range tier. Pure value for AI depends on how much of your work uses the software where the Radeon card lags.
If you use PyTorch, ComfyUI and Ollama on Windows, the RTX 5070 Ti works with a standard setup and gives the faster result in every test cited. The Radeon card can work too, but you rely on AMD's own Windows packages, Linux-only acceleration in some tools, or the slower Vulkan route. That is time you spend, which belongs in a value judgement.
If you are comfortable with extra setup, the RX 9070 XT gives the same 16 GB. It needs a larger supply and a larger case than the Prime, though, so count those costs. Prices change, so check current prices before buying and compare the whole platform. Long-term software support favours NVIDIA today, but AMD has been widening the list of supported cards with each ROCm release.
Which should you buy#
Buy the RTX 5070 Ti for dependable AI work
Choose the ASUS Prime if you run PyTorch, ComfyUI, llama.cpp or Ollama and want them to work on Windows or Linux with no extra setup. It is faster in the published tests and fits compact cases.
Buy the RX 9070 XT if you are comfortable with extra setup
Choose the ASUS TUF if you work on Linux with ROCm, or use the Vulkan backend of llama.cpp, and accept slower results in the cited tests. Check that your case and a 850 W supply suit the card.
Look elsewhere if you need more memory
Neither card goes beyond 16 GB. Our best AMD GPU for AI guide covers the Radeon range, and the RTX 5080 and RTX 5070 Ti side-by-side covers the NVIDIA step up.
Verdict#
Top pick ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OCSee the details
The ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC is the better AI card of the two. It leads every published test cited, it works with standard CUDA installs, and it asks for a smaller power supply and a smaller case.
The ASUS TUF Gaming Radeon RX 9070 XT 16GB OC has a workable AI path, and it is worth considering if you accept extra setup and slower published results. Read the GPUs overview for other options at each memory size.
Stock of both cards in India varies by partner brand, so check Indian listings and warranty terms before you pick a side, and make sure your power supply suits the card you choose.
Both cards come from several partner brands in India, so compare warranty length and service centres in your city before choosing between them.
Frequently asked questions#
Can the RX 9070 XT run local LLMs?
Yes. llama.cpp supports it through ROCm and Vulkan, and Ollama lists RX 9000 series cards on Linux. Expect lower speed than the RTX 5070 Ti in published tests.
Does PyTorch work on the RX 9070 XT?
AMD lists the card as supported in ROCm 10. The PyTorch selector offers ROCm builds on Linux only, so Windows users rely on AMD's own packages.
Is the RTX 5070 Ti faster for Stable Diffusion?
In the tests cited, yes. Procyon's SDXL score is about 66% higher, and ComfyUI on Linux shows about 20% more images per minute. The gap is clearer on Windows, and CUDA support makes setup simpler.
How much faster is the RTX 5070 Ti for LLMs?
Published text-generation tests put it about 24% to 47% ahead of the RX 9070 XT, including about 40% in Puget's MLPerf Client run. The scoreboard figure comes from volunteers, so it shows direction more than size.
Do both cards have the same memory?
Both have 16 GB on a 256-bit bus. The RTX 5070 Ti uses GDDR7 and the RX 9070 XT uses GDDR6, which works out to 896 GB/s against up to 640 GB/s.
Does the RTX 5070 Ti or the RX 9070 XT need the bigger power supply?
The TUF RX 9070 XT. ASUS recommends 850 W for it and 750 W for the Prime RTX 5070 Ti. Check your current supply against these figures, since an undersized one can cause crashes under load.
Is Vulkan faster than ROCm on the RX 9070 XT?
Phoronix found Vulkan gave more tokens per second in Lemonade tests, but on a Radeon AI PRO R9700, not the RX 9070 XT. Treat it as a hint and not a measurement of this card.
Is ROCm good enough for beginners?
Linux with a supported release works, and Windows support has arrived in ROCm 10. CUDA remains easier because most tutorials assume it. Beginners who want the least friction are better served by NVIDIA.
Sources & credits#
We have not tested these products ourselves. Specs come from the makers; benchmark figures come from the sources we name.
- ASUS India, Prime GeForce RTX 5070 Ti 16GB OC product page (opens in a new tab)
- ASUS India, TUF Gaming Radeon RX 9070 XT 16GB OC product page (opens in a new tab)
- AMD, Radeon RX 9070 XT product page (opens in a new tab)
- NVIDIA, GeForce 50 series graphics cards (opens in a new tab)
- AMD, ROCm 10.0.0 release notes (opens in a new tab)
- PyTorch, install selector (opens in a new tab)
- Ollama, GPU documentation (opens in a new tab)
- Puget Systems, 2025 Consumer GPU Content Creation Roundup (opens in a new tab)
- Tom's Hardware, AMD Radeon RX 9070 XT and RX 9070 review (opens in a new tab)
- Back2Gaming, AMD Radeon AI PRO R9700 32GB AI Performance Review (opens in a new tab)
- llama.cpp community, Performance of llama.cpp with Vulkan (opens in a new tab)
- Phoronix, Lemonade Vulkan vs ROCm (opens in a new tab)
Facts and figures in this article come from these sources. Articles are compiled from the makers' published specifications and the benchmarks named above, and checked by the NextAIGrid Editorial Team.
Disclaimer
This comparison is for information only. Specifications and availability change, so check the maker's page before you buy. Found an error? Tell us.
How was this comparison put together?
It draws on 7 named sources: maker specification pages and published third-party benchmarks, listed in the article. We have not tested these products ourselves. Specs come from the makers; benchmark figures come from the sources we name. Specifications and sources were last checked on 17 November 2026. Warranty terms and availability differ by brand and seller in India, so check the maker's India page for the warranty period and buy from an authorised seller. Read how we research and our editorial policy.
Spotted an error? Tell us. Confirmed fixes are listed on the corrections page.