Explainer

CUDA vs ROCm for AI: What Buyers Should Know

In this article
  1. What CUDA and ROCm are
  2. Software support by tool
  3. Performance: what published tests show
  4. Windows, Linux and your setup
  5. Image generation and ComfyUI
  6. Where the gap is closing
  7. What this means when buying
  8. Frequently asked questions
  9. Sources & credits

Short answer

CUDA is NVIDIA's software platform and ROCm is AMD's. For AI, CUDA works with nearly every tool without extra steps, while ROCm works with the main tools on supported Radeon cards, with more setup and some limits by operating system. Buy NVIDIA for the least friction. Buy AMD if you use Linux or run llama.cpp through Vulkan.

  • AMD's ROCm 10.0.0 release notes list the RX 9070 XT and RX 7900 XTX as supported, with Windows 11 support added.
  • The PyTorch install selector offers a ROCm build for Linux only.
  • Ollama lists RX 9000 series cards for AMD acceleration on Linux only.
  • In published language-model and image-generation tests the RTX 5070 Ti led the RX 9070 XT by about 20% to 66%.

What CUDA and ROCm are#

A GPU is a processor made for doing thousands of small calculations at once. To use it for AI, a program needs a software layer that sends the work to the chip. CUDA and ROCm are those layers.

NVIDIA says it introduced CUDA so that general compute workloads could use GPU throughput without going through graphics interfaces. The CUDA Toolkit bundles a compiler, libraries and tools. AMD describes ROCm as its open software stack for GPU computing, with runtimes, compilers, system tools and math libraries, and with frameworks such as PyTorch built on top.

Most AI tools do not call either layer directly. They call a framework, such as PyTorch or llama.cpp, and the framework picks a backend. So the question for a buyer is not which platform is better in theory. It is which backend your tools support on your card and your operating system.

Tensor cores and low-precision maths

Modern AI cards include units built for matrix maths at low precision. NVIDIA lists 5th-generation Tensor Cores with FP4 support on the GeForce RTX 5090, rated at 3352 AI TOPS. AMD lists 128 AI accelerators on the RX 9070 XT, with peak matrix throughput of 389 TOPS for INT8 and 779 TOPS for INT4, doubled with structured sparsity. AMD's page lists no floating-point FP4 format.

The two ratings are not comparable. They use different number formats and peak conditions. What matters for a buyer is whether the software you run uses these units. CUDA tools generally do, because NVIDIA's libraries target Tensor Cores. On Radeon, support depends on the tool and the ROCm release.

Software support by tool#

Whether a card works for AI depends on three things: the cards each platform lists, the framework you use and the app on top.

Which Radeon cards ROCm supports

AMD's release notes for ROCm 10.0.0 list the RX 9000 series, including the RX 9070 XT, 9070 and 9060 XT, and the RX 7000 series, including the RX 7900 XTX, 7900 XT, 7800 XT, 7700 XT and 7600. The same notes list Windows 11 support for Radeon, which earlier ROCm releases lacked. AMD's Linux system requirements page lists Ubuntu 24.04.4 and 22.04.5 and Red Hat Enterprise Linux 10.1 and 9.7 for Radeon, so the supported distributions are a short list.

Cards outside the list may still work. llama.cpp's build guide describes an environment-variable override that lets some unsupported Radeon cards run, and says it works on Linux only. Treat it as a workaround, not a supported route, and do not plan a purchase around it.

NVIDIA cards need no list check in the same way. Ollama's GPU page asks for a compute capability of 5.0 or higher and a recent driver on NVIDIA.

PyTorch support

PyTorch is the main training and inference framework. Its install selector on pytorch.org offers CUDA builds for Linux and Windows, and a ROCm build for Linux. It states that ROCm is not available on Windows through pytorch.org.

AMD fills the gap on Windows with its own packages, and ComfyUI's README points Windows users to them. On Linux, ComfyUI uses ROCm wheels from pytorch.org. The practical result is that a Radeon card works on Windows, but the install path differs from the one most tutorials show.

On NVIDIA, the standard command from the selector installs a CUDA build on either system. That is the main reason beginners find NVIDIA easier.

llama.cpp, Ollama and LM Studio

llama.cpp is the engine behind many local-LLM apps. Its build guide has separate sections for CUDA, HIP (the ROCm path) and Vulkan. Vulkan is a vendor-neutral graphics and compute interface that runs on both brands, and it often needs fewer setup steps on Radeon than ROCm.

Ollama lists RX 9000 series cards, including the RX 9070 XT, for AMD acceleration on Linux, and RX 7000 series cards on both Linux and Windows. It also supports Vulkan on both systems. LM Studio's version 0.4.17 changelog says the Radeon AI PRO R9600D and R9700 are supported through its llama.cpp runtime. It names no RX 9070 XT, so check the app's release notes before you rely on it.

Lists like these change often. Check the tool's page for your exact card before you buy, because a card missing from the list can fall back to the processor, which is slow.

Performance: what published tests show#

Two kinds of test compare the brands. Lab reviews run both on one setup. Community scoreboards collect volunteer runs per backend.

Puget Systems' MLPerf Client run gave the RTX 5070 Ti 157.6 tokens per second and the RX 9070 XT 112.5, about 40% more for NVIDIA.

MLPerf Client v1.0 LLM tests, 2nd+ token generation rate (model not named on chart): token_generation_2nd_plus (tokens/s, higher is better)

MLPerf Client v1.0 LLM tests, 2nd+ token generation rate (model not named on chart): token_generation_2nd_plusINNO3D GeForce RTX 5090 X3 OC 32GB: 248 tokens/sINNO3D GeForce RTX 5090 X3 OC 32GB248 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC: 168.7 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC168.7 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC: 157.6 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC157.6 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC: 157.6 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC157.6 tokens/sASUS TUF Gaming Radeon RX 9070 XT 16GB OC: 112.5 tokens/sASUS TUF Gaming Radeon RX 9070 XT 16GB OC112.5 tokens/s

5 products. Highest: INNO3D GeForce RTX 5090 X3 OC 32GB, 248 tokens/s. Lowest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 112.5 tokens/s.

MLPerf Client v1.0 LLM tests, 2nd+ token generation rate (model not named on chart): token_generation_2nd_plus
Producttokens/s
INNO3D GeForce RTX 5090 X3 OC 32GB248
ASUS TUF Gaming GeForce RTX 5080 16GB OC168.7
ASUS Prime GeForce RTX 5070 Ti 16GB OC157.6
ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC157.6
ASUS TUF Gaming Radeon RX 9070 XT 16GB OC112.5
Source: Puget Systems (opens in a new tab). MLPerf Client v1.0; NVIDIA/AMD via ONNX (DirectML path); Windows 11 Pro 26100; NVIDIA driver 577.00; AMD Adrenalin 25.8.1; Ryzen 9 9950X3D; Balanced power profile. Chip-level result mapped to the listed model; Published 2025-09-25. Values read from chart bar labels. NVIDIA 5090/5080/4090 listed by Puget only as "NVIDIA GeForce RTX" (reference vs partner not stated); 5070 Ti was ASUS PRIME OC (partner); 9070 XT was Sapphire Nitro+ OC (partner); 7900 XTX listed as "AMD Radeon RX 7900 XTX" (variant not stated).

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

Back2Gaming's Linux test ran the same 9B model with CUDA on the NVIDIA card and ROCm on the Radeon cards. The RTX 5070 Ti reached 124.1 tokens per second, the RX 9070 XT 84.2 and the Radeon AI PRO R9700 83.4.

Qwen3.5-9B (Q4_K_M) chat decode, 512-token answer: token_generation_decode (tokens/s, higher is better)

Qwen3.5-9B (Q4_K_M) chat decode, 512-token answer: token_generation_decodeASUS Prime GeForce RTX 5070 Ti 16GB OC: 124.1 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC124.1 tokens/sASUS TUF Gaming Radeon RX 9070 XT 16GB OC: 84.2 tokens/sASUS TUF Gaming Radeon RX 9070 XT 16GB OC84.2 tokens/sPowerColor Radeon AI PRO R9700 32GB: 83.4 tokens/sPowerColor Radeon AI PRO R9700 32GB83.4 tokens/s

3 products. Highest: ASUS Prime GeForce RTX 5070 Ti 16GB OC, 124.1 tokens/s. Lowest: PowerColor Radeon AI PRO R9700 32GB, 83.4 tokens/s.

Qwen3.5-9B (Q4_K_M) chat decode, 512-token answer: token_generation_decode
Producttokens/s
ASUS Prime GeForce RTX 5070 Ti 16GB OC124.1
ASUS TUF Gaming Radeon RX 9070 XT 16GB OC84.2
PowerColor Radeon AI PRO R9700 32GB83.4
Source: Back2Gaming (opens in a new tab). 32,768-token context, flash attention on, fixed-seed greedy sampling; 10-minute steady-state run. Chip-level result mapped to the listed model; Published 2026-09-23. Single small outlet; Ubuntu 24.04.4, ROCm 7.2.4 on Radeon, NVIDIA driver 595.91.07 CUDA 13.2, llama.cpp build 11046, Ryzen 7 9800X3D. R9700 was a PowerColor AI PRO R9700 (AMD reference-style blower, loaner); brand of the 5070 Ti and 9070 XT not stated. Values read from article text; model fits in VRAM on all three.

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

The llama.cpp scoreboards show how much the backend matters on Radeon. On Llama 2 7B at 4-bit with flash attention, the RX 9070 XT reaches 142.0 tokens per second on Vulkan and 97.28 on ROCm. The R9700 reaches 152.7 on Vulkan and 97.98 on ROCm. These come from different volunteers and builds, so read them as direction.

llama-bench, Llama 2 7B Q4_0, Vulkan backend, tg128, flash attention on: token_generation_tg128 (tokens/s, higher is better)

llama-bench, Llama 2 7B Q4_0, Vulkan backend, tg128, flash attention on: token_generation_tg128INNO3D GeForce RTX 5090 X3 OC 32GB: 273.7 tokens/sINNO3D GeForce RTX 5090 X3 OC 32GB273.7 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC: 192.2 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC192.2 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC: 176.2 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC176.2 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC: 176.2 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC176.2 tokens/sPowerColor Radeon AI PRO R9700 32GB: 152.7 tokens/sPowerColor Radeon AI PRO R9700 32GB152.7 tokens/sASUS TUF Gaming Radeon RX 9070 XT 16GB OC: 142 tokens/sASUS TUF Gaming Radeon RX 9070 XT 16GB OC142 tokens/s

6 products. Highest: INNO3D GeForce RTX 5090 X3 OC 32GB, 273.68 tokens/s. Lowest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 142 tokens/s.

llama-bench, Llama 2 7B Q4_0, Vulkan backend, tg128, flash attention on: token_generation_tg128
Producttokens/s
INNO3D GeForce RTX 5090 X3 OC 32GB273.68
ASUS TUF Gaming GeForce RTX 5080 16GB OC192.17
ASUS Prime GeForce RTX 5070 Ti 16GB OC176.18
ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC176.18
PowerColor Radeon AI PRO R9700 32GB152.7
ASUS TUF Gaming Radeon RX 9070 XT 16GB OC142
Source: llama.cpp GitHub discussion (community-reported) (opens in a new tab). llama-bench -ngl 99/100 -fa 1. Chip-level result mapped to the listed model; commit ca71fb9; Community-reported (support only). Scoreboard table in the discussion post, last edited 2026-11-05, read 2026-11-17. Each row is a different volunteer with own board maker (partner cards), driver, OS and commit; not a controlled test.

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

llama-bench, Llama 2 7B Q4_0, ROCm/HIP backend, tg128, flash attention on: token_generation_tg128 (tokens/s, higher is better)

llama-bench, Llama 2 7B Q4_0, ROCm/HIP backend, tg128, flash attention on: token_generation_tg128PowerColor Radeon AI PRO R9700 32GB: 98 tokens/sPowerColor Radeon AI PRO R9700 32GB98 tokens/sASUS TUF Gaming Radeon RX 9070 XT 16GB OC: 97.3 tokens/sASUS TUF Gaming Radeon RX 9070 XT 16GB OC97.3 tokens/s

2 products. Highest: PowerColor Radeon AI PRO R9700 32GB, 97.98 tokens/s. Lowest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 97.28 tokens/s.

llama-bench, Llama 2 7B Q4_0, ROCm/HIP backend, tg128, flash attention on: token_generation_tg128
Producttokens/s
PowerColor Radeon AI PRO R9700 32GB97.98
ASUS TUF Gaming Radeon RX 9070 XT 16GB OC97.28
Source: llama.cpp GitHub discussion (community-reported) (opens in a new tab). llama-bench -ngl 99/100 -fa 1. Chip-level result mapped to the listed model; commit bd4ef13; Community-reported (support only). Scoreboard table in the discussion post, last edited 2025-12-07, read 2026-11-17. Each row is a different volunteer with own board maker, driver, OS and commit; not a controlled test. AMD-only chart; ROCm numbers are not comparable with the CUDA or Vulkan charts; memory per scoreboard: 32 GB / GDDR6 / 256 bit.

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

On the same model the NVIDIA cards on CUDA reach 182.43 tokens per second for the RTX 5070 Ti, 184.68 for the RTX 5080 and 300.4 for the RTX 5090.

llama-bench, Llama 2 7B Q4_0, CUDA backend, tg128, flash attention on: token_generation_tg128 (tokens/s, higher is better)

llama-bench, Llama 2 7B Q4_0, CUDA backend, tg128, flash attention on: token_generation_tg128INNO3D GeForce RTX 5090 X3 OC 32GB: 300.4 tokens/sINNO3D GeForce RTX 5090 X3 OC 32GB300.4 tokens/sNVIDIA RTX PRO 5000 Blackwell 48GB: 226.3 tokens/sNVIDIA RTX PRO 5000 Blackwell 48GB226.3 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC: 184.7 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC184.7 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC: 182.4 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC182.4 tokens/s

4 products. Highest: INNO3D GeForce RTX 5090 X3 OC 32GB, 300.4 tokens/s. Lowest: ASUS Prime GeForce RTX 5070 Ti 16GB OC, 182.43 tokens/s.

llama-bench, Llama 2 7B Q4_0, CUDA backend, tg128, flash attention on: token_generation_tg128
Producttokens/s
INNO3D GeForce RTX 5090 X3 OC 32GB300.4
NVIDIA RTX PRO 5000 Blackwell 48GB226.31
ASUS TUF Gaming GeForce RTX 5080 16GB OC184.68
ASUS Prime GeForce RTX 5070 Ti 16GB OC182.43
Source: llama.cpp GitHub discussion (community-reported) (opens in a new tab). llama-bench -ngl 99/100 -fa 1. Chip-level result mapped to the listed model; commit 8cf6b42; Community-reported (support only). Scoreboard table in the discussion post, last edited 2026-09-06, read 2026-11-17. Each row is a different volunteer with own board maker, driver, OS and commit; not a controlled test; memory per scoreboard: 32 GB / GDDR7 / 512 bit.

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

Phoronix reported, for the R9700 workstation card in its Lemonade runs, that Vulkan gave more tokens per second, while ROCm gave lower latency to the first token. The best backend on Radeon therefore depends on whether you value throughput or response time.

Image generation gives a range of results. In Tom's Hardware's Procyon Stable Diffusion XL test the RTX 5070 Ti scored 3,265 and the RX 9070 XT scored 1,969, a lead of about 66% for NVIDIA.

Procyon AI Image Generation, Stable Diffusion XL, benchmark score: benchmark_score (score, higher is better)

Procyon AI Image Generation, Stable Diffusion XL, benchmark score: benchmark_scoreASUS Prime GeForce RTX 5070 Ti 16GB OC: 3265 scoreASUS Prime GeForce RTX 5070 Ti 16GB OC3265 scoreASUS TUF Gaming Radeon RX 9070 XT 16GB OC: 1969 scoreASUS TUF Gaming Radeon RX 9070 XT 16GB OC1969 score

2 products. Highest: ASUS Prime GeForce RTX 5070 Ti 16GB OC, 3265 score. Lowest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 1969 score.

Procyon AI Image Generation, Stable Diffusion XL, benchmark score: benchmark_score
Productscore
ASUS Prime GeForce RTX 5070 Ti 16GB OC3265
ASUS TUF Gaming Radeon RX 9070 XT 16GB OC1969
Source: Tom's Hardware (opens in a new tab). Procyon (UL), best available engine per GPU. Chip-level result mapped to the listed model; Published 2025-03-05. Values read from chart bar labels. Cards: Asus RTX 5070 Ti Prime (partner), PowerColor Reaper RX 9070 XT (partner), RX 7900 XTX MBA reference. Windows 11 24H2; AMD preview driver 24.30.31.03 for 9070 cards, 25.2.1 for 7000 series; Nvidia 572-family drivers; Ryzen 7 9800X3D. Tom's used the best available variant (TensorRT/DirectML/OpenVINO, FP32/FP16/INT8) per GPU.

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

Back2Gaming's ComfyUI SDXL test is closer: 9.84 images per minute for the RTX 5070 Ti and 8.22 for the RX 9070 XT, about 20% more for NVIDIA.

Stable Diffusion XL 1.0 base, ComfyUI, 1024x1024, 30 steps, Euler, batch 1: images_per_minute (images/min, higher is better)

Stable Diffusion XL 1.0 base, ComfyUI, 1024x1024, 30 steps, Euler, batch 1: images_per_minuteASUS Prime GeForce RTX 5070 Ti 16GB OC: 9.84 images/minASUS Prime GeForce RTX 5070 Ti 16GB OC9.84 images/minPowerColor Radeon AI PRO R9700 32GB: 9.03 images/minPowerColor Radeon AI PRO R9700 32GB9.03 images/minASUS TUF Gaming Radeon RX 9070 XT 16GB OC: 8.22 images/minASUS TUF Gaming Radeon RX 9070 XT 16GB OC8.22 images/min

3 products. Highest: ASUS Prime GeForce RTX 5070 Ti 16GB OC, 9.84 images/min. Lowest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 8.22 images/min.

Stable Diffusion XL 1.0 base, ComfyUI, 1024x1024, 30 steps, Euler, batch 1: images_per_minute
Productimages/min
ASUS Prime GeForce RTX 5070 Ti 16GB OC9.84
PowerColor Radeon AI PRO R9700 32GB9.03
ASUS TUF Gaming Radeon RX 9070 XT 16GB OC8.22
Source: Back2Gaming (opens in a new tab). 10-minute continuous run. Chip-level result mapped to the listed model; Published 2026-09-23. Single small outlet; Ubuntu 24.04.4, ROCm 7.2.4 on Radeon, NVIDIA driver 595.91.07 CUDA 13.2, llama.cpp build 11046, Ryzen 7 9800X3D. R9700 was a PowerColor AI PRO R9700 (AMD reference-style blower, loaner); brand of the 5070 Ti and 9070 XT not stated. Values read from article text.

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

Across the language-model and image-generation tests above, the NVIDIA lead ran from about 20% to 66%. Tom's Hardware also ran Procyon's AI Vision test, which measures computer vision, not image generation. It gave 4831 for the RTX 5070 Ti and 1339 for the RX 9070 XT, a much wider gap. Tom's notes that AMD does poorly in integer modes through ONNX, so treat that result as an outlier for this workload.

Windows, Linux and your setup#

Your operating system narrows the choice more than the brand does.

Table
SetupNVIDIA with CUDAAMD with ROCm or Vulkan
Windows, standard installSupported by the main toolsROCm 10.0 covers Windows 11; PyTorch needs AMD packages
Linux, supported distributionSupportedSupported on the named distributions
llama.cppCUDA backendHIP or Vulkan backend
OllamaSupportedRX 9000 on Linux only; Vulkan on both

If you use Windows for daily work and want an AMD card for AI, check whether your tools list the card on Windows. If they list it on Linux only, a separate Linux install is the supported route. On NVIDIA you can usually stay on one system and follow the standard install.

Use the table as a checklist. If your tool and system fall in a cell that says supported with a condition, read the condition before you buy.

A short checklist before you buy

  1. Name the tools you will use, such as PyTorch, llama.cpp, Ollama or ComfyUI.
  2. Open each tool's GPU page and look for your exact card, not only the brand.
  3. Check your operating system against the list. Several AMD entries differ between Windows and Linux.
  4. Look at the backend options. On Radeon, Vulkan in llama.cpp is a fallback that needs little setup.
  5. Check the release date of the page. ROCm and the tools move quickly, and a list that is a few months old may have changed.
  6. Check the power supply and case guidance on the board maker's page.

If you skip these checks, one risk is buying a card and then finding that your tool supports it only on the other operating system.

Image generation and ComfyUI#

ComfyUI is a popular node-based tool for Stable Diffusion and similar image models. Its README lists AMD support through ROCm. On Linux it uses ROCm wheels from pytorch.org. On Windows 11 it points to AMD's own packages, built for ROCm 10.0.0 with PyTorch 2.13. It names device options by GPU family, with separate entries for the RX 9070 and RX 9070 XT, the RX 9060 family and the RX 7900 XT and XTX.

The README also mentions a tuning option that makes the first run slow and later runs faster on AMD. That is a typical ROCm trait. The platform works, but it asks you to read the project's notes. On NVIDIA the same tool runs after a standard install.

For image work the memory matters more than the platform. SDXL-class models fit in 16 GB on either brand. If you plan larger image models or video generation, look at cards with more memory in our best GPU for Stable Diffusion guide.

Where the gap is closing#

The gap between the platforms has narrowed. ROCm 10.0 adds Windows 11 support for Radeon, and AMD ships its own Windows PyTorch packages. Ollama and llama.cpp both accept Vulkan, which removes the ROCm requirement for basic inference. AMD lists 128 AI accelerators on the RX 9070 XT and a 32 GB workstation card, the Radeon AI PRO R9700, which gives AMD buyers more memory per card than any gaming Radeon in our research. Our best high VRAM GPU guide covers that card.

Speed has not closed in the same way. Published tests still show NVIDIA ahead on the same tier, and the lead is largest where tools use NVIDIA's own libraries. If a Radeon card is your choice, plan for a gap in the tens of percent, and check newer reviews because drivers and ROCm releases change the numbers.

What this means when buying#

If you want the shortest path from purchase to a working setup, buy NVIDIA. Our RTX 5070 Ti vs RX 9070 XT comparison walks through the two 16 GB cards, using the maker pages for the ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC (opens in a new tab) and the ASUS TUF Gaming Radeon RX 9070 XT 16GB OC (opens in a new tab).

If you prefer AMD, see our best AMD GPU for AI guide for the Radeon range and its ROCm status by card. For a view of speeds across both brands, read our round-up of GPU benchmarks for local LLMs. The GPUs page lists every guide.

Whatever you buy, check three things before you pay: that the tool you plan to use lists your card, that your operating system is supported, and that the power supply and case suit the card. Read the compatibility pages of AMD, NVIDIA and your tool at the time you buy, because they change with each release.

For Indian students and freelancers, most tutorials assume CUDA, which is a practical reason to prefer NVIDIA unless AMD pricing in India clearly wins.

Indian developer communities and course material lean towards CUDA, so an AMD card may leave you solving more problems on your own.

Frequently asked questions#

Is ROCm as good as CUDA?

For the main tools on supported cards it works, but CUDA has broader coverage and fewer setup steps. Published tests show NVIDIA ahead on the same tier.

Can the RX 9070 XT run PyTorch?

AMD lists it as supported in ROCm 10. The PyTorch selector offers ROCm on Linux, and Windows users rely on AMD's own packages. Check the current ROCm notes before you buy, because support changes between releases.

Does Ollama work on AMD cards?

Yes. It lists RX 9000 series cards on Linux and RX 7000 series cards on Linux and Windows, and it also supports Vulkan. Check Ollama's list for your exact card, because support differs by operating system.

Is Vulkan faster than ROCm on Radeon?

In the llama.cpp scoreboards and in Phoronix tests it gave more tokens per second, while ROCm gave lower latency to the first token. Vulkan is easier to set up, so it is a sensible first try on Radeon cards.

Do I need Linux to use an AMD card for AI?

Not always. ROCm 10.0 lists Windows 11, and Vulkan works on both systems, but Linux has the widest tool support. If you want the fewest problems with AMD cards, Linux is still the safer choice.

Which is better for Stable Diffusion?

NVIDIA is simpler. ComfyUI supports AMD through ROCm, and the published SDXL tests show the RTX 5070 Ti about 20% to 66% ahead of the RX 9070 XT.

Can I use a Radeon card that ROCm does not list?

Sometimes. llama.cpp's build guide describes an environment-variable override that lets some unsupported Radeon cards run, on Linux only. It is a workaround, not a supported route, so do not plan a purchase around it.

Does LM Studio support the RX 9070 XT?

Its version 0.4.17 changelog names the Radeon AI PRO R9600D and R9700 but not the RX 9070 XT. Check the app's latest release notes for your card before you buy.

Sources & credits#

We have not tested these products ourselves. Specs come from the makers; benchmark figures come from the sources we name.

Facts and figures in this article come from these sources. Articles are compiled from the makers' published specifications and the benchmarks named above, and checked by the NextAIGrid Editorial Team.

Disclaimer

This article is for information only. Software support lists and availability change, so check the maker pages before you buy. Found an error? Tell us.

How was this explainer put together?

It draws on 4 named sources: maker specification pages and published third-party benchmarks, listed in the article. We have not tested these products ourselves. Specs come from the makers; benchmark figures come from the sources we name. Specifications and sources were last checked on 17 November 2026. Read how we research and our editorial policy.

Spotted an error? Tell us. Confirmed fixes are listed on the corrections page.

What questions do readers ask next?

Back to top