Comparison

RTX 5090 vs RTX 5080 for AI: 32 GB or 16 GB?

In this article
  1. Side by side
  2. Key differences
  3. Performance and benchmarks
  4. Value for money
  5. Which should you buy
  6. Verdict
  7. Frequently asked questions
  8. Sources & credits

Short answer

Buy the INNO3D GeForce RTX 5090 X3 OC 32GB if your models will not fit in 16 GB or you want the fastest single consumer card for local LLMs. Buy the ASUS TUF Gaming GeForce RTX 5080 16GB OC if your models fit in 16 GB and you want a smaller power budget.

  • The RTX 5090 has 32 GB of GDDR7 on a 512-bit bus; the RTX 5080 has 16 GB on a 256-bit bus.
  • Puget Systems measured about 47% faster token generation on the RTX 5090 in MLPerf Client.
  • NVIDIA lists 575 W total graphics power for the RTX 5090 and 360 W for the RTX 5080.
  • INNO3D lists a 1000 W minimum system power for its RTX 5090; ASUS recommends 850 W for its RTX 5080.
  • Pick 1INNO3D GeForce RTX 5090 X3 OC 32GB
  • Pick 2ASUS TUF Gaming GeForce RTX 5080 16GB OC

Side by side#

Side by side
SpecINNO3D GeForce RTX 5090 X3 OC 32GBASUS TUF Gaming GeForce RTX 5080 16GB OC
GPU NVIDIA Blackwell, RTX 5090NVIDIA GeForce RTX 5080
Memory size (VRAM) 32 GB16 GB
Memory type GDDR7GDDR7
Memory interface 512-bit256-bit
Memory bandwidth 1792 GB/sNot stated
CUDA cores 21,76010,752
AI performance 3352 AI TOPS1801 TOPS
Boost clock 2452 MHz2700 MHz default, 2730 MHz OC mode
Total board power 575 W (NVIDIA reference)360 W (NVIDIA reference)
Power connector 4x 8-pin via adapter, or one 16-pin cableOne 16-pin
Power supply guidance 1000 W minimum system power850 W recommended
Card size Not stated348 x 146 x 72 mm, 3.6 slots

Prices change, so check current prices before buying.

Key differences#

The two cards use the same Blackwell generation, so software support is identical. What differs is the amount of silicon, the memory system and the power the card draws. For local AI, the memory pool decides which models run at all, and the compute decides how quickly they answer.

Memory size and bandwidth

The headline gap is 32 GB against 16 GB. VRAM is the graphics memory that holds a model's weights and its working cache. If a model does not fit, the runtime moves layers to system RAM and speed drops sharply. A 16 GB card therefore suits models up to roughly the 14 billion parameter class at 4-bit, while 32 GB opens up larger models and longer context.

Hardware Corner's ranking shows the effect. It lists a 4-bit Qwen3 30B mixture-of-experts model at 141.63 tokens per second on the RTX 5090 at 16K context, and it shows no result for the RTX 5080 on that model. The 16 GB card appears in that ranking only for smaller models.

INNO3D lists 28 Gbps memory on a 512-bit bus for 1792 GB/s on the RTX 5090. ASUS lists a 256-bit bus for the RTX 5080 but no bandwidth figure. Puget Systems lists 960 GB/s for the RTX 5080, which is a little over half of the INNO3D figure. Token generation is mostly limited by how fast weights stream out of memory, so the wider bus matters as much as the capacity.

Compute and AI rating

NVIDIA lists 21,760 CUDA cores for the RTX 5090 and 10,752 for the RTX 5080, which is a little over double. Its AI rating is 3352 AI TOPS against 1801. These are peak ratings tied to NVIDIA's lowest-precision formats, so use them to compare one NVIDIA card with another, not to compare across brands.

The RTX 5080 runs a higher boost clock, 2700 MHz by default on the ASUS card against 2452 MHz on the INNO3D. The clock does not offset the core count. Benchmarks below show the RTX 5090 ahead on every language-model test.

Power and power supply

NVIDIA lists 575 W total graphics power for the RTX 5090 and 360 W for the RTX 5080. INNO3D lists 1000 W as the minimum system power for its card. ASUS recommends an 850 W power supply for the TUF, and its note says the figure assumes a fully overclocked graphics card and processor.

INNO3D also lists two ways to connect power: four 8-pin PCIe cables through the supplied adapter, or one 600 W PCIe Gen 5 cable. Follow the maker's instructions for connectors. A 1000 W unit is a major part of the platform cost, so count it when you compare the two cards.

Size and cooling

ASUS lists the TUF RTX 5080 at 348 x 146 x 72 mm and 3.6 slots. That needs a large case with good airflow. INNO3D describes a triple-fan cooler with a large vapour chamber for the RTX 5090 X3 OC, and its page lists 333 x 137 x 60 without units, so check the maker's own sheet against your case before you order.

Indian rooms run warm for much of the year. A card that draws 575 W adds more heat to the room than one that draws 360 W, and long training or batch runs sustain that load. Plan case airflow and room ventilation accordingly.

Software support

Both cards run on CUDA, so the software stack is the same. The PyTorch install selector offers CUDA builds for Linux and Windows, and llama.cpp, ComfyUI and most training libraries target CUDA first. You do not trade software support for memory when you move from one card to the other.

NVIDIA lists the GeForce RTX 5090 with 5th-generation Tensor Cores and FP4 support. The RTX 5080 belongs to the same generation. Newer low-precision model formats therefore work on both, and the larger card runs them faster. The CUDA vs ROCm for AI explainer goes deeper on the software side.

Availability and service in India

Availability of flagship cards changes quickly. Match the model number against the maker's page before you buy, and keep the invoice, because board partners handle warranty claims through their own channels.

ASUS and INNO3D publish different support terms. Read each maker's India page for the warranty period and service route, and do not assume that the two partners offer the same cover.

Performance and benchmarks#

Two sources carry most of the evidence here. Puget Systems publishes a lab roundup that ran MLPerf Client on both cards, and Hardware Corner publishes llama.cpp runs at 16K context. Neither source names the board maker for these two cards, so treat the results as chip-level figures rather than a verdict on the INNO3D or ASUS models specifically.

MLPerf Client v1.0 LLM tests, 2nd+ token generation rate (model not named on chart): token_generation_2nd_plus (tokens/s, higher is better)

MLPerf Client v1.0 LLM tests, 2nd+ token generation rate (model not named on chart): token_generation_2nd_plusINNO3D GeForce RTX 5090 X3 OC 32GB: 248 tokens/sINNO3D GeForce RTX 5090 X3 OC 32GB248 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC: 168.7 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC168.7 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC: 157.6 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC157.6 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC: 157.6 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC157.6 tokens/sASUS TUF Gaming Radeon RX 9070 XT 16GB OC: 112.5 tokens/sASUS TUF Gaming Radeon RX 9070 XT 16GB OC112.5 tokens/s

5 products. Highest: INNO3D GeForce RTX 5090 X3 OC 32GB, 248 tokens/s. Lowest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 112.5 tokens/s.

MLPerf Client v1.0 LLM tests, 2nd+ token generation rate (model not named on chart): token_generation_2nd_plus
Producttokens/s
INNO3D GeForce RTX 5090 X3 OC 32GB248
ASUS TUF Gaming GeForce RTX 5080 16GB OC168.7
ASUS Prime GeForce RTX 5070 Ti 16GB OC157.6
ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC157.6
ASUS TUF Gaming Radeon RX 9070 XT 16GB OC112.5
Source: Puget Systems (opens in a new tab). MLPerf Client v1.0; NVIDIA/AMD via ONNX (DirectML path); Windows 11 Pro 26100; NVIDIA driver 577.00; AMD Adrenalin 25.8.1; Ryzen 9 9950X3D; Balanced power profile. Chip-level result mapped to the listed model; Published 2025-09-25. Values read from chart bar labels. NVIDIA 5090/5080/4090 listed by Puget only as "NVIDIA GeForce RTX" (reference vs partner not stated); 5070 Ti was ASUS PRIME OC (partner); 9070 XT was Sapphire Nitro+ OC (partner); 7900 XTX listed as "AMD Radeon RX 7900 XTX" (variant not stated).

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

Puget Systems' MLPerf Client run, on one test platform, shows 248.0 tokens per second for the RTX 5090 and 168.7 for the RTX 5080. That is about 47% more generation speed. The same chart set records time to first token, the wait before the first word appears.

MLPerf Client v1.0 LLM tests, geomean time to first token: time_to_first_token_geomean (seconds, lower is better)

MLPerf Client v1.0 LLM tests, geomean time to first token: time_to_first_token_geomeanINNO3D GeForce RTX 5090 X3 OC 32GB: 0.1 secondsINNO3D GeForce RTX 5090 X3 OC 32GB0.1 secondsASUS TUF Gaming GeForce RTX 5080 16GB OC: 0.13 secondsASUS TUF Gaming GeForce RTX 5080 16GB OC0.13 secondsASUS Prime GeForce RTX 5070 Ti 16GB OC: 0.14 secondsASUS Prime GeForce RTX 5070 Ti 16GB OC0.14 secondsASUS TUF Gaming Radeon RX 9070 XT 16GB OC: 0.38 secondsASUS TUF Gaming Radeon RX 9070 XT 16GB OC0.38 seconds

4 products. Lowest: INNO3D GeForce RTX 5090 X3 OC 32GB, 0.11 seconds. Highest: ASUS TUF Gaming Radeon RX 9070 XT 16GB OC, 0.38 seconds.

MLPerf Client v1.0 LLM tests, geomean time to first token: time_to_first_token_geomean
Productseconds
INNO3D GeForce RTX 5090 X3 OC 32GB0.105
ASUS TUF Gaming GeForce RTX 5080 16GB OC0.132
ASUS Prime GeForce RTX 5070 Ti 16GB OC0.145
ASUS TUF Gaming Radeon RX 9070 XT 16GB OC0.38
Source: Puget Systems (opens in a new tab). MLPerf Client v1.0; NVIDIA/AMD via ONNX (DirectML path); Windows 11 Pro 26100; NVIDIA driver 577.00; AMD Adrenalin 25.8.1; Ryzen 9 9950X3D; Balanced power profile. Chip-level result mapped to the listed model; Published 2025-09-25. Values read from chart bar labels. NVIDIA 5090/5080/4090 listed by Puget only as "NVIDIA GeForce RTX" (reference vs partner not stated); 5070 Ti was ASUS PRIME OC (partner); 9070 XT was Sapphire Nitro+ OC (partner); 7900 XTX listed as "AMD Radeon RX 7900 XTX" (variant not stated); lower is better.

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

The RTX 5090 reached the first token in 0.105 seconds against 0.132 for the RTX 5080. Both are short waits. The difference matters more when prompts are long or when many requests queue up.

Hardware Corner ran llama.cpp on Ubuntu with CUDA 12.8 at 16K context depth.

Qwen3 14B 4-bit, token generation at 16K context: token_generation (tokens/s, higher is better)

Qwen3 14B 4-bit, token generation at 16K context: token_generationINNO3D GeForce RTX 5090 X3 OC 32GB: 102.7 tokens/sINNO3D GeForce RTX 5090 X3 OC 32GB102.7 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC: 64 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC64 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC: 58 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC58 tokens/s

3 products. Highest: INNO3D GeForce RTX 5090 X3 OC 32GB, 102.68 tokens/s. Lowest: ASUS Prime GeForce RTX 5070 Ti 16GB OC, 57.98 tokens/s.

Qwen3 14B 4-bit, token generation at 16K context: token_generation
Producttokens/s
INNO3D GeForce RTX 5090 X3 OC 32GB102.68
ASUS TUF Gaming GeForce RTX 5080 16GB OC64.04
ASUS Prime GeForce RTX 5070 Ti 16GB OC57.98
Source: Hardware Corner (opens in a new tab). llama-bench, Ubuntu 24.04, CUDA 12.8, Q4_K_XL, 16K context depth. Chip-level result mapped to the listed model; Page 'Updated: December 9, 2025'. Hardware Corner does not say whether reference/Founders or partner cards were used. Their own measurements on Ubuntu 24.04, llama.cpp llama-bench, CUDA 12.8, Q4_K_XL quantisation; driver version not stated. Page also lists prices (not recorded). Product label on page: 'RTX Pro 6000 WS'.

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

On Qwen3 14B at 4-bit, Hardware Corner measured 102.68 tokens per second on the RTX 5090 and 64.04 on the RTX 5080, a lead of about 60%. On gpt-oss 20B, a mixture-of-experts model, the numbers were 249.19 and 140.48.

gpt-oss 20B 4-bit, token generation at 16K context: token_generation (tokens/s, higher is better)

gpt-oss 20B 4-bit, token generation at 16K context: token_generationINNO3D GeForce RTX 5090 X3 OC 32GB: 249.2 tokens/sINNO3D GeForce RTX 5090 X3 OC 32GB249.2 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC: 140.5 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC140.5 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC: 133.1 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC133.1 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC: 133.1 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC133.1 tokens/s

4 products. Highest: INNO3D GeForce RTX 5090 X3 OC 32GB, 249.19 tokens/s. Lowest: ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC, 133.05 tokens/s.

gpt-oss 20B 4-bit, token generation at 16K context: token_generation
Producttokens/s
INNO3D GeForce RTX 5090 X3 OC 32GB249.19
ASUS TUF Gaming GeForce RTX 5080 16GB OC140.48
ASUS Prime GeForce RTX 5070 Ti 16GB OC133.05
ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC133.05
Source: Hardware Corner (opens in a new tab). llama-bench, Ubuntu 24.04, CUDA 12.8, Q4_K_XL, 16K context depth. Chip-level result mapped to the listed model; Page 'Updated: December 9, 2025'. Hardware Corner does not say whether reference/Founders or partner cards were used. Their own measurements on Ubuntu 24.04, llama.cpp llama-bench, CUDA 12.8, Q4_K_XL quantisation; driver version not stated. Page also lists prices (not recorded). Product label on page: 'RTX Pro 6000 WS'.

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

That is a lead of about 77% for the RTX 5090. On Qwen3 8B the lead was 145.34 against 94.14, or about 54%. Across the Hardware Corner models the RTX 5090's lead over the RTX 5080 ranged from about 54% to 77%, and it did not rise in step with model size.

Image generation tells a different story in the one chart that includes both cards.

SD.Next (2025-01-29), SDXL Base 1.0, batch size 1: image_generation_iterations_per_second (it/s, higher is better)

SD.Next (2025-01-29), SDXL Base 1.0, batch size 1: image_generation_iterations_per_secondASUS TUF Gaming GeForce RTX 5080 16GB OC: 19.1 it/sASUS TUF Gaming GeForce RTX 5080 16GB OC19.1 it/sINNO3D GeForce RTX 5090 X3 OC 32GB: 16.2 it/sINNO3D GeForce RTX 5090 X3 OC 32GB16.2 it/s

2 products. Highest: ASUS TUF Gaming GeForce RTX 5080 16GB OC, 19.13 it/s. Lowest: INNO3D GeForce RTX 5090 X3 OC 32GB, 16.16 it/s.

SD.Next (2025-01-29), SDXL Base 1.0, batch size 1: image_generation_iterations_per_second
Productit/s
ASUS TUF Gaming GeForce RTX 5080 16GB OC19.13
INNO3D GeForce RTX 5090 X3 OC 32GB16.16
Source: Puget Systems (opens in a new tab). Windows 11 Pro 26100; Ryzen 9 9950X; Balanced power profile. Chip-level result mapped to the listed model; Published 2025-02-21, updated 2025-04-01 (Puget warns content may be out of date). Values read from chart bar labels. Card variants (reference/Founders vs partner) not stated by Puget. Drivers: 5090 571.86, 5080 572.12, 4090 566.36, 7900 XTX Adrenalin 24.12.1; NVIDIA-only chart, no AMD card in this chart.

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

Puget Systems measured SD.Next with SDXL at batch size 1 and reported 19.13 iterations per second for the RTX 5080 and 16.16 for the RTX 5090. Puget called this result strange and named a likely cause: a CPU bottleneck in the generation pipeline, which hits short runs at small batch sizes hardest. It saw one CPU thread at full load at the start of each run. Puget also reported that at batch sizes of 4 and above the results looked more as expected, and that the RTX 5090 pulled further ahead as the batch size grew. Puget's article was published at the cards' launch and carries its own warning that it may be out of date. Do not read the batch-1 chart as proof that the cheaper card generates images faster in general.

A few cautions apply to all of these figures. Token generation depends on the model, the quantisation, the context length and the software build. Puget Systems used MLPerf Client, which does not name the model on its chart, while Hardware Corner used named open models with llama-bench. The two sources agree on the order of the cards, which is the main point. They differ on the size of the gap, which is why we quote each one separately and do not average them.

Prompt processing, the speed at which a card reads a long prompt, is a separate measure. Puget flagged its own launch-window prompt-processing results for these cards as unreliable and suspected a driver fault, so we do not rank on them. Hardware Corner's prompt-processing table is more consistent. On Qwen3 14B at 16K context it lists 4473.08 tokens per second for the RTX 5090 against 2542.01 for the RTX 5080.

Qwen3 14B 4-bit, prompt processing at 16K context: prompt_processing (tokens/s, higher is better)

Qwen3 14B 4-bit, prompt processing at 16K context: prompt_processingINNO3D GeForce RTX 5090 X3 OC 32GB: 4473.1 tokens/sINNO3D GeForce RTX 5090 X3 OC 32GB4473.1 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC: 2542 tokens/sASUS TUF Gaming GeForce RTX 5080 16GB OC2542 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC: 2303.9 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB OC2303.9 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC: 2303.9 tokens/sASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC2303.9 tokens/s

4 products. Highest: INNO3D GeForce RTX 5090 X3 OC 32GB, 4473.08 tokens/s. Lowest: ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC, 2303.9 tokens/s.

Qwen3 14B 4-bit, prompt processing at 16K context: prompt_processing
Producttokens/s
INNO3D GeForce RTX 5090 X3 OC 32GB4473.08
ASUS TUF Gaming GeForce RTX 5080 16GB OC2542.01
ASUS Prime GeForce RTX 5070 Ti 16GB OC2303.9
ASUS Prime GeForce RTX 5070 Ti 16GB GDDR7 OC2303.9
Source: Hardware Corner (opens in a new tab). llama-bench, Ubuntu 24.04, CUDA 12.8, Q4_K_XL, 16K context depth. Chip-level result mapped to the listed model; Page 'Updated: December 9, 2025'. Hardware Corner does not say whether reference/Founders or partner cards were used. Their own measurements on Ubuntu 24.04, llama.cpp llama-bench, CUDA 12.8, Q4_K_XL quantisation; driver version not stated. Page also lists prices (not recorded). Product label on page: 'RTX Pro 6000 WS'.

About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.

Long documents and retrieval workloads lean on this measure. If you feed whole files into a model, the RTX 5090's lead here is about 76% on this test, which is larger than its lead in generation speed on the same model.

Value for money#

Both cards sit at the top of the market. The RTX 5090 is the flagship tier, and the RTX 5080 is the tier below it. Judge value by what you need the VRAM for rather than by speed alone.

If every model you plan to run fits in 16 GB, the RTX 5080 gives much of the speed on small and mid-size models for a much lower power budget and a lighter power supply. The RTX 5090 gives double the memory and about 50% to 75% more tokens per second on mid-size models in the benchmarks above, plus room for larger models and longer context.

Platform cost matters. The RTX 5090 asks for a 1000 W minimum system power from INNO3D, and its connectors need care. The RTX 5080 works with an 850 W unit from ASUS. A larger power supply, a bigger case and stronger cooling are all costs that sit outside the card itself. Prices change, so check current prices for each part before buying.

Both cards get the same CUDA software, so long-term support does not separate them. Warranty and service terms come from the board partner, so check the INNO3D and ASUS pages for India before you buy.

Which should you buy#

Buy the RTX 5090 if your models are large

Choose the INNO3D card if you run models that do not fit in 16 GB, work with long context, or want the shortest waits on mid-size models. It also suits buyers who plan to keep the card for several model generations, because 32 GB leaves room to grow.

Buy the RTX 5080 if your models fit in 16 GB

Choose the ASUS TUF if you run small and mid-size models, mostly image generation or fine-tuning small adapters, and want a more modest power supply. It is the sensible card for a home machine that is also used for work and gaming.

Choose by workload, not by prestige

Fine-tuning small adapters, running a chat model for one person and generating images all fit comfortably in 16 GB. Serving several users, running larger reasoning models or keeping long contexts in memory do not. List the biggest model you expect to run in the next two years, check its memory need against the table in our VRAM explainer, and let that number pick the card.

Skip both if you only experiment

If your use is occasional, a card in the tier below may cover it. Read our guide to the best 16 GB GPU for AI for options at that memory size, and the RTX 5080 vs RTX 5070 Ti comparison if you are weighing the upper tier.

Verdict#

Top pick INNO3D GeForce RTX 5090 X3 OC 32GBSee the details

The RTX 5090 is the better AI card, and the INNO3D X3 OC is the one we compare here. It has twice the memory, the highest published token rates and room for larger models. It also asks for the biggest power supply and the most cooling.

The RTX 5080 is the better choice when your models fit in 16 GB and your budget for the power supply and case is limited. See how much memory your models need in our explainer on how much VRAM an LLM needs, then pick the card that clears that line. The wider GPU category page lists every card we cover.

Frequently asked questions#

Is 32 GB of VRAM necessary for local AI?

No. Many popular models run in 16 GB at 4-bit. 32 GB matters for larger models, long context or several models loaded together. Most home users do not need it, so check your own model list first.

How much faster is the RTX 5090 than the RTX 5080 for LLMs?

In Puget Systems' MLPerf Client chart it generated tokens about 47% faster. Hardware Corner's llama.cpp runs show leads of roughly 54% to 77% depending on the model.

Can the RTX 5080 run the same models as the RTX 5090?

Only those that fit in 16 GB, or that run with layers moved to system memory at lower speed. Models above 16 GB at your chosen quantisation need the larger card.

What power supply does each card need?

ASUS recommends 850 W for the TUF RTX 5080. INNO3D gives 1000 W as the minimum system power for its RTX 5090 X3 OC. Both figures assume a full system, so budget for a quality supply with the right connectors.

Is the RTX 5090 faster for image generation too?

Not at batch size 1 in the one chart with both cards, where Puget Systems showed the RTX 5080 ahead. Puget blamed a likely CPU bottleneck and reported the RTX 5090 pulling further ahead at larger batch sizes.

Do the RTX 5090 and the RTX 5080 both use CUDA?

Yes. Both are NVIDIA Blackwell cards, so PyTorch, llama.cpp and ComfyUI run on either through CUDA. Software support is the same, so the choice rests on memory capacity, speed, power draw and price.

Sources & credits#

We have not tested these products ourselves. Specs come from the makers; benchmark figures come from the sources we name.

Facts and figures in this article come from these sources. Articles are compiled from the makers' published specifications and the benchmarks named above, and checked by the NextAIGrid Editorial Team.

Disclaimer

This comparison is for information only. Specifications and availability change, so check the maker's page before you buy. Found an error? Tell us.

How was this comparison put together?

It draws on 6 named sources: maker specification pages and published third-party benchmarks, listed in the article. We have not tested these products ourselves. Specs come from the makers; benchmark figures come from the sources we name. Specifications and sources were last checked on 17 November 2026. Warranty terms and availability differ by brand and seller in India, so check the maker's India page for the warranty period and buy from an authorised seller. Read how we research and our editorial policy.

Spotted an error? Tell us. Confirmed fixes are listed on the corrections page.

What questions do readers ask next?

Back to top
Top pickINNO3D GeForce RTX 5090 X3 OC 32GB See it