In this article
Short answer
This image-generation build uses a 16 GB GeForce RTX 5070 Ti with a Ryzen 5 7600, 64 GB of DDR5 and a 2 TB NVMe drive. VRAM and system memory decide whether SDXL and FLUX models load comfortably. It suits ComfyUI and Stable Diffusion users who want fast generation without a flagship budget.
- FLUX.1-dev at fp8 peaked near 15.4 GiB of VRAM on a 16 GB card, so 16 GB is the practical floor.
- ComputingForGeeks suggests 32 GB of system RAM for FLUX-class models and calls 64 GB comfortable.
- Large checkpoints make a roomy, fast NVMe drive worthwhile.
- The PNY card is 329 mm long and three slots thick; the case clears it easily.
- CPUAMD Ryzen 5 7600 6-Core AM5 Desktop Processor with Wraith Stealth Cooler
- GPUPNY GeForce RTX 5070 Ti 16GB ARGB OC Triple Fan
The parts list#
| Component | Part | Why |
|---|---|---|
| CPU | AMD Ryzen 5 7600 6-Core AM5 Desktop Processor with Wraith Stealth Cooler | 6 cores at 65 W; image generation leans on the GPU, not the CPU |
| Motherboard | MSI MAG B850 Tomahawk WiFi ATX Motherboard | PCIe 5.0 x16 slot, three M.2 slots, four DIMM slots |
| GPU | PNY GeForce RTX 5070 Ti 16GB ARGB OC Triple Fan | 16 GB of GDDR7 with a triple-fan cooler for long batch runs |
| RAM | TeamGroup T-Create Expert 64GB (2x32GB) DDR5-6000 CL38 Kit | 64 GB for FLUX-class models and several open workflows |
| Storage | Lexar NM790 2TB PCIe 4.0 NVMe M.2 SSD | 7400 MB/s reads and 1500 TBW for large model files |
| PSU | Corsair RM750e 750W ATX 3.1 Gold Power Supply | Meets PNY's 750 W minimum with a native 12V-2x6 cable |
| CPU cooler | Thermalright Phantom Spirit 120 SE Black Air CPU Cooler | Dual tower, 154 mm tall, quieter than a stock cooler |
| Case | NZXT H5 Flow RGB Black Mid-Tower Case | Fits 410 mm cards, coolers to 170 mm and a front 360 mm radiator |
Why these parts#
CPU
The Ryzen 5 7600 (opens in a new tab) has 6 cores and 12 threads. AMD gives it a 5.1 GHz peak boost clock and a default TDP of 65 W. AMD lists the AMD Wraith Stealth cooler as the thermal solution in the box. The processor supports PCIe 5.0, with 24 usable lanes, and DDR5 memory up to 128 GB. The official top speed with two modules is DDR5-5200.
For image generation the CPU prepares prompts, loads weights and runs the interface. It does not do the sampling. Puget Systems did note that a single-thread CPU bottleneck distorted its SD.Next results at batch size 1, so a quick core is worth having, and the 7600 is quick. Beyond that, extra cores bring little for this job. The money goes to the card instead. If you plan to mix in heavy data work, the Ryzen 5 9600X or an eight-core chip is a sensible step up.
Motherboard
The MSI MAG B850 Tomahawk WiFi (opens in a new tab) is an ATX board on AMD's B850 chipset. MSI's page names Ryzen 9000, 8000 and 7000 processors as supported, so the 7600 is covered. It has four DDR5 slots with a 256 GB maximum, one PCIe 5.0 slot that runs up to x16 from the CPU and a PCIe 4.0 x4 slot from the chipset.
Storage is generous. MSI lists three M.2 slots: M.2_1 at PCIe 5.0 x4, M.2_2 at PCIe 4.0 x4 from the CPU and M.2_3 at PCIe 4.0 x4 from the chipset. It lists RAID 0 and RAID 1 for NVMe drives, 5 Gb Ethernet and Wi-Fi 7. Image workflows tend to spread models across several drives over time, so extra sockets matter.
GPU
The PNY GeForce RTX 5070 Ti ARGB OC Triple Fan Plus (opens in a new tab) has 16 GB of GDDR7 on a 256-bit bus at 896 GB/s, according to PNY. NVIDIA credits the chip with 8,960 CUDA cores and 300 W of board power. PNY lists the card at about 329 x 138 x 60 mm and three slots wide, with one 16-pin connector and a 16-to-3x8 adapter in the box.
Sixteen gigabytes is the number to watch. ComputingForGeeks lists 8 GB as enough for SDXL and small distilled models, 12 GB as able to run FLUX.1-dev at fp8 only by streaming weights, and 16 GB as about 1.7 times faster than 12 GB on FLUX. A 24 GB card holds the FLUX fp8 checkpoint whole. Video models need more still, and the source suggests 24 GB as a safer start for them.
PNY lists a PCI Express 5.0 x16 interface and recommends a 750 W or greater power supply. NVIDIA lists NVLink as unsupported, which makes no difference for image generation on a single card.
RAM
The TeamGroup T-Create Expert (opens in a new tab) kit gives 64 GB as two 32 GB modules, at 6000 MT/s with CL38 timings and 1.35 V. The kit has XMP 3.0 profiles for Intel and EXPO profiles for AMD, and TeamGroup names AMD 800 and 600 series boards among supported platforms, which covers the B850.
ComputingForGeeks found that a host with a small amount of memory took 160 seconds for the first FLUX image, against 68 seconds on a host with plenty of memory, while warm speed barely changed. Loading models, switching checkpoints and running a refiner all use system memory first. That is why 64 GB is more than a luxury here.
The memory runs above AMD's listed DDR5-5200 for this chip, so the profile counts as overclocking, which TeamGroup states. If the system will not start with the profile on, lower the speed in the BIOS. For kit choices, see the AI and machine learning RAM guide.
Storage
The Lexar NM790 2TB (opens in a new tab) uses a PCIe 4.0 x4 NVMe interface. Lexar lists up to 7400 MB/s reads, up to 6500 MB/s writes, 1500 TBW of endurance and a five-year warranty. It says the speeds come from internal testing and that write speed varies by capacity.
Image work fills a drive faster than most people expect. ComputingForGeeks lists a FLUX fp8 checkpoint at 17.2 GB, and a working setup often holds several of those along with SDXL models, LoRAs, upscalers and outputs. The drive is sold bare, so use the heatsink on the motherboard's M.2 socket. Put it in M.2_2 or M.2_3 and leave M.2_1 free for a later Gen 5 drive.
Power supply
PNY lists a 750 W or greater supply for this card, and ASUS lists the same 750 W for its own 5070 Ti. The Corsair RM750e (opens in a new tab) is a 750 W ATX 3.1 unit, PCIe 5.1 compliant, with a seven-year warranty and a 140 mm length.
Corsair's cable table lists one native 12V-2x6 (12+4) cable, one 12V-2x6-to-dual-8-pin (6+2) cable and two EPS 4+4-pin cables. The native cable covers the card's 16-pin connector directly. This build matches PNY's figure exactly. If you want margin for a larger card later, step up to the 850 W unit used in the deep learning PC build.
CPU cooler
The Thermalright Phantom Spirit 120 SE Black (opens in a new tab) is a twin-tower air cooler built on seven 6 mm heat pipes and two 120 mm PWM fans rated at 1500 RPM, 66.17 CFM and 25.6 dBA. Thermalright lists AM5 and LGA1851 support and a height of 154 mm. It weighs 765 g.
The 7600 ships with a Wraith Stealth cooler, so the build does not need this one, but a dual tower runs quieter under a long batch job. It is an optional upgrade. Thermalright does not list a TDP rating and advises checking clearance for tall memory. The case allows 170 mm of cooler height, so the 154 mm tower fits.
Case
The NZXT H5 Flow RGB (opens in a new tab) lists room for graphics cards up to 410 mm, coolers up to 170 mm and power supplies up to 200 mm. The PNY card is 329 mm, the cooler 154 mm and the supply 140 mm, so everything clears. NZXT lists support for ATX, micro-ATX, mini-ITX and E-ATX boards up to 277 mm, and seven expansion slots.
It supports a front radiator up to 360 mm and a top radiator up to 240 mm, or 280 mm with low-profile memory only. NZXT ships it with one F360 RGB Core front fan and a rear F120Q. It is a compact case, so check clearances if you change the cooler or card.
Expected performance#
The best published image-generation numbers for this tier come from ComputingForGeeks, which ran ComfyUI on several GPUs at 1024 x 1024. It did not test the RTX 5070 Ti, so the charts show the RTX 5090 and the RTX 5060 Ti 16GB, which bracket it. The figures are for the GPU chip, not this board partner's card.
ComfyUI SDXL 1024x1024, 30 steps: time per image (seconds, lower is better)
2 products. Lowest: INNO3D GeForce RTX 5090 X3 OC 32GB, 4.84 seconds. Highest: ASUS Dual GeForce RTX 5060 Ti 16GB GDDR7 OC, 11.34 seconds.
| Product | seconds |
|---|---|
| INNO3D GeForce RTX 5090 X3 OC 32GB | 4.84 |
| ASUS Dual GeForce RTX 5060 Ti 16GB GDDR7 OC | 11.34 |
About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.
On an SDXL image at 30 steps, the 5090 took about 4.8 seconds and the 5060 Ti took about 11.3 seconds. Lower is better in this chart.
ComfyUI FLUX.1-dev fp8 1024x1024, 20 steps: time per image (seconds, lower is better)
2 products. Lowest: INNO3D GeForce RTX 5090 X3 OC 32GB, 8.84 seconds. Highest: ASUS Dual GeForce RTX 5060 Ti 16GB GDDR7 OC, 37.02 seconds.
| Product | seconds |
|---|---|
| INNO3D GeForce RTX 5090 X3 OC 32GB | 8.84 |
| ASUS Dual GeForce RTX 5060 Ti 16GB GDDR7 OC | 37.02 |
About this data: figures are copied from the named source, not measured by us, and the test system and settings are those the source states above. See all benchmark sources and credits.
On FLUX.1-dev at fp8 and 20 steps, the 5090 took about 8.8 seconds and the 5060 Ti took about 37.0 seconds. The 5060 Ti has less memory bandwidth and fewer cores than the 5070 Ti, so the larger model shows the gap more.
The 5070 Ti has 8,960 CUDA cores against 4,608 on the 5060 Ti, and 896 GB/s of bandwidth against 448 GB/s. In its Ollama language-model tests, ComputingForGeeks measured the 5070 Ti at 1.66 to 1.85 times the speed of the 5060 Ti. That is a language-model result and not an image result, so use it only as a guide to the gap.
For context, ComputingForGeeks measured the RTX 5090 at about 1.71 times the speed of an RTX 3090 on SDXL and 2.63 times on FLUX fp8, with the 5090 power-limited in that test. Puget Systems found that results at larger batch sizes looked normal and that the 5090 pulled ahead of the 4090 as batches grew.
Upgrade path#
The graphics card is the main lever. A 24 GB or 32 GB card holds FLUX whole and has room for LoRAs and upscalers; the best high VRAM GPU for AI guide lists options. A card of that size changes the power plan, so check the new card's recommended wattage and connector first.
Storage is the second lever. The board has two more M.2 slots, so a second drive is an easy addition. Memory is already generous at 64 GB, though the board takes up to 256 GB.
The processor can move up within AM5. A Ryzen 7 9700X keeps the same board and cooler. The PCIe 5.0 slot means a faster card will not be held back by the board.
Alternatives by budget band#
For a lower outlay, the 3 lakh entry build uses a 16 GB RTX 5060 Ti and ComfyUI results in the same charts. For training and general deep learning, the deep learning PC build shares the same graphics chip with a different platform. For the largest models, the local LLM PC build goes to 32 GB.
Assembly and setup notes#
These points come from the makers' own documentation. Read each manual for steps.
- Graphics card: PNY lists a 16-pin connector and a 16-to-3x8 adapter. The Corsair supply has a native cable, so use that.
- Slot: PNY lists a three-slot card, so leave the slot below it free.
- Memory: TeamGroup states that XMP and EXPO are overclocking profiles. Enable one in the BIOS, then test stability.
- M.2 sockets: MSI lists three sockets. Use the board heatsink on the drive.
- Cooler: Thermalright advises checking memory clearance. Fit the memory first, then the cooler.
- Software: install the current NVIDIA driver, then a ComfyUI or Automatic1111 build that matches your CUDA version. The software's install page lists supported pairings.
Verdict#
This is a balanced image-generation machine. The RTX 5070 Ti gives the 16 GB that FLUX needs, 64 GB of memory covers model loading, and the Ryzen 5 7600 handles the rest at 65 W. The cooler, case and power supply all clear the makers' figures.
Choose it for ComfyUI, SDXL and FLUX work at a mid-range tier. Choose a larger card if you plan video generation, which needs more VRAM.
Frequently asked questions#
Is 16 GB of VRAM enough for FLUX?
Yes, with limits. FLUX.1-dev at fp8 peaked near 15.4 GiB on a 16 GB card, according to ComputingForGeeks. In default mode ComfyUI streams the weights, so it still runs.
How much system RAM do I need?
ComputingForGeeks suggests at least 32 GB for FLUX-class models and calls 64 GB comfortable. This build uses 64 GB, which leaves room for the operating system, the interface and other open tools while a large model loads.
Does the CPU matter for Stable Diffusion?
Less than the GPU. Puget Systems found a single-thread CPU bottleneck at batch size 1, so a quick core helps, but extra cores add little.
Is the 5070 Ti much faster than the 5060 Ti?
For language models, ComputingForGeeks measured 1.66 to 1.85 times. The source has no image result for the 5070 Ti, so the image gap is not measured.
Can I run video models on this build?
Possibly at small sizes. ComputingForGeeks says video models need the most VRAM, and suggests 24 GB as a safer start and 32 GB as comfortable.
Does AMD work for Stable Diffusion?
It can, but most guides and extensions assume NVIDIA's CUDA, so setup is harder on AMD. See our CUDA vs ROCm for AI explainer for the trade-offs before you choose a card.
Sources & credits#
We have not tested these products ourselves. Specs come from the makers; benchmark figures come from the sources we name.
- AMD, Ryzen 5 7600 product page (opens in a new tab)
- MSI, MAG B850 Tomahawk WiFi specifications (opens in a new tab)
- PNY, RTX 5070 Ti 16GB Triple Fan ARGB OC Plus brochure (opens in a new tab)
- NVIDIA India, GeForce RTX 50 series, RTX 5070 family (opens in a new tab)
- TeamGroup, T-Create Expert DDR5 memory (opens in a new tab)
- Lexar, NM790 SSD (opens in a new tab)
- Corsair, RM750e power supply (opens in a new tab)
- Thermalright, Phantom Spirit 120 SE (opens in a new tab)
- NZXT, H5 Flow (opens in a new tab)
- ComputingForGeeks, Best GPU for ComfyUI & Stable Diffusion by VRAM (opens in a new tab)
- ComputingForGeeks, RTX 5060 Ti vs 5070 Ti: Local AI Benchmarks (opens in a new tab)
- Puget Systems, NVIDIA GeForce RTX 5090 & 5080 AI Review (opens in a new tab)
Facts and figures in this article come from these sources. Articles are compiled from the makers' published specifications and the benchmarks named above, and checked by the NextAIGrid Editorial Team.
Disclaimer
This page is for information only. Specifications and availability change, so check the maker's page before you buy. Found an error? Tell us.
How was this pc build put together?
It draws on 8 named sources: maker specification pages and published third-party benchmarks, listed in the article. We have not tested these products ourselves. Specs come from the makers; benchmark figures come from the sources we name. Specifications and sources were last checked on 17 November 2026. Warranty terms and availability differ by brand and seller in India, so check the maker's India page for the warranty period and buy from an authorised seller. Read how we research and our editorial policy.
Spotted an error? Tell us. Confirmed fixes are listed on the corrections page.